據網友提供信息，2015年職稱英語考試理工A閱讀理解其中一篇文章來自于理工教材完形填空第13篇 Better Solar Energy Systems: More Heat, More Light。各位考友可以參考原文，比對答案。

以下為理工教材原文及譯文：

+ 第十三篇 Better Solar Energy Systems: More Heat,More Light

Solar photovoltaic thermal energy systems,or PVTs, generate both heat and electricity, but until now they haven’t been very good at the heat-generating part compared to a stand-alone solar thermal collector. That’s because they operate at low temperatures to cool crystalline silicon solar cells, which lets the silicon generate more electricity but isn’ta very efficient way to gather heat.

That’s a problem of economics. Good solar hot-water systems can harvest much more energy than a solar-electric system at a substantially lower cost. And it’s also a space problem: photovoltaic cells can take up all the space on the roof, leaving little room for thermal applications.

In a pair of studies, Joshua Pearce, anassociate professor of materials science and engineering, has devised a solution in the form of a better PVT made with a different kind of silicon. His research collaborators are Kunal Girotra from Thin Silicon in California and Michael Pathak and Stephen Harrison from Queen’s University, Canada.

Most solar panels are made with crystalline silicon, but you can also make solar cells out of amorphous silicon, commonly known as thin-film silicon. They don’t create as much electricity, but they are lighter, flexible, and cheaper. And, because they require much less silicon,they have a greener footprint. Unfortunately, thin-film silicon solar cells are vulnerable to some bad-news physics in the form of the Staebler-Wronski effect.

“That means that their efficiency drops when you expose them to light— pretty much the worst possible effect for a solar cell,” Pearce explains,which is one of the reasons thin-film solar panels make up only a small fraction of the market.

However, Pearce and his team found a way to engineer around the Staebler-Wronski effect by incorporating thin-film siliconin a new type of PVT. You don’t have to cool down thin-film silicon to make it work. In fact, Pearce’s group discovered that by heating it to solar-thermal operating temperatures, near the boiling point of water, they could make thicker cells that largely overcame the Staebler-Wronski effect. When they applied the thin-film silicon directly to a solar thermal energy collector,they also found that by baking the cell once a day, they boosted the solar cell’s electrical efficiency by over 10 percent.

譯文：

第十三篇 更有效的太陽能系統：更多熱量，更強燈光

太陽能光伏熱能系統，也叫PVT，能夠生成熱量和電能。與太陽熱能單機收集器相比，傳統太陽能光伏熱能系統在轉換熱能方面效率不是很高。原因是，為了使晶體硅太陽能電池冷卻，該系統在低溫下工作。因此，硅體能產出更多的電能，卻不能有效地產生熱量。

第一，經濟問題。好的太陽能熱水系統比太陽能電力系統收集的能量更多，而且成本低得多。第二，空間問題。光電管占去屋頂的所有的空間，幾乎沒有空間留給熱能的產出。

在一項研究中，材料科學與工程副教授Joshua Pearce找到了一個解決方案：用另外一種硅制成PVT來解決效能問題。他的合作者有：來自加利福尼亞ThinSilicon的Kunal Girotra和加拿大皇后大學的Michael Pathak和Stephen Harrison。

大部分太陽能電池板是由晶體硅制成，但是，你也可以用非晶硅制成太陽能電池，這種非晶體硅通常被叫作薄膜硅。它們不能產生那么多的電能，但是更亮、更靈巧、成本更低。而且，由于它們需要的硅較少，它們更環保。不幸的是，薄膜硅太陽能電池易受SWE效應攻擊(在光的照射下，非晶硅氫的導電性短時間內顯著衰退，這種特性被稱為SWE效應)。

“當被暴露在光線下，那就意味著它們的能效會降低——這幾乎是太陽能電池最可能糟糕的效應。”Pearce解釋道。這就是薄型太陽能板只占有一少部分市場的原因。

然而，Pearce和他的團隊把薄膜硅合成為一種新型的PVT，可以克服或繞過SWE效應。這種方法可以不用冷卻薄膜硅而讓它們產生效能。事實上，Pearce團隊發現，通過把薄膜硅加熱到太陽熱能操作溫度，即臨近水的沸點，可以把它制成較厚的電池，從而可以遏制SWE效應。當把薄膜硅直接應用到太陽熱能集熱器時，他們也發現，如果一天把太陽能電池加熱一次，那么太陽能的電力效能會增加10%。

更多精彩資訊請關注查字典資訊網，我們將持續為您更新最新資訊!